UPS Tuncmatik HI‐TECH Ultra X9 10 kVA DSP LCD / 3P/3P / Online / Witho

UPS Tuncmatik HI-TECH Ultra X9 10 kVA DSP LCD 3P/3P Online, without batterieshttp://www.tuncmatik.com/ru/product/overview/hi-tech-ultra-10-kva.htmlInputPhase : 3 phase 4 wire and groundNominal voltage : 380/400/415 VACVoltaj range : 208~478 VACFrequency range : 45-55Hz de 50Hz/54-66Hz at 60Hz (auto sensing)Current THDi : ≤3% (100% nonlinear load)Bypass voltage range : Max. voltagePower factor : ≥0.99OutputPhase : 3 phase 4 wire and groundNominal voltage : 380/400/415 VAC,Power factor : 0.9Voltage regulation : ± 1%Frequency Normal mode : ± 1%, ± 2%, ± 4%, ± 5%, ± 10% of the rated frequency (optional)Frequency Battery mode : (50/60±0.2%) HzCrest factor : 3/1THD : ≤2% with linear load, ≤5% with non linear loadEfficieny : 93%BatteryVoltage : Standart unit.±120Vdc (20pcs 12V7Ah) (2x20pcs 12V9Ah optional) Long run unitCharge current (A) (charge current can be set according to battery capacity installed : Standard unit.1.35A (2.7A optional) Long run unit. Max. current 10ATransfer time : Utility to battery. 0ms; Utility to bypass. 0msProtectionOverload AC mode : Loads ≤110%. last 60min, ≤125%. last 10min, ≤150%. last 1min, >150% change to bypass immediatelyOverload Battery mode : Loads ≤110%. last 10min, ≤125%. last 1min, ≤150%. >150% shut down UPS immediatelyOverload Bypass mode : Breaker 20AShort circuit 120 peak : Over temperature Line mode : Switch to bypass, Backup modeBattery low Alarm and switch off : Self-diagnostic Upon power on and software control : EPO (optional)